4. Operator - Service Rig Training (Module 4)

Course Code:

SRT04

Date/Location:

There are no future dates for this course

SRT - SERVICE RIG TRAINING - Operator Edition

The Service Rig Training program takes an employee from basic entry level on a Service Rig through to Operator (or Driller). The training consists of videos, quizzes, simulations and simulation-based assessments. The program covers the following eight groups of Work Methods:

Transportation
Site Requirements
Spotting Equipment
Rigging In Equipment
Basic Equipment Operations
Basic Well Operations (Rod Work)
Basic Well Operations (Tubing Work)
Basic Well Operations (Swabbing)

The trainee progresses through the four floor positions, in the context of each of the Work Methods, to gain the necessary knowledge to progress to the On-The-Job (OJT), or ‘hands-on’ component of his training.

Prerequisite: Derrick Hand classroom and field training

Course Length: Between 12 and 24 hours, dependent upon learner. 16 hours is appropriate for a blended learning environment

Description:

Operator or Driller is considered to be a senior position, and has spent sufficient time in a ‘hands-on’ learning environment to gain knowledge from his various operating experience to progress to the Driller training stage. The Driller trainee will progress through the same series of eight modules that will build on his knowledge of Service Rig operation appropriate to his position, including knowledge of equipment and more advanced procedures.

Measurable Outcomes:

Upon successful completion, the Operator trainee will demonstrate an advanced understanding of equipment, work methods and job responsibilities associated with the efficient operation of a Service Rig. These include the special considerations associated with managing complex tasks, organizing and leading the crew, giving directions to his subordinates, training juniors in the proper use of tools and operations of equipment and to help create a “SAFETY FIRST ATTITUDE” for himself and all “Rig Family Members”.

The Service Rig Training offers the following features and benefits:

State of the art, 3D interactive environment
Mobile training solution
Self-paced learning
Greater retention rate than traditional training methods
Subject Matter Expert developed work methods
Competency based training
Safe-Fail training environment
Increased productivity and efficiency
Reduced downtime
Validation Tool
Ongoing tracking of employee training

Instructions:

Once you have completed the course registration, an email will follow shortly containing a web link as well as a username and password in order to login for the training.

Upon successful completion of the web training you will receive a certificate of completion.

This online simulation based training will prepare you for the oil and gas industry as a Service Rig Operator.

Note: This course is conducted online and as such there will be no handouts.

SRT TRAINING MODULES:

TRANSPORTATION

Secure Loads
Prepare to Move to a New Lease Site

SITE REQUIREMENTS

Site Requirements Overview
Pre‐Job Safety Meetings
Lease Organization / Navigation
Emergency Preparation / Response
Identify Lease Hazards
Identify Site Hazards ‐ Simulation

SPOTTING

Spotting Overview
Spot Crew Change Unit
Spot Matting
Spot Rig Carrier
Spot Pump Truck
Spot Rig Tank
Spot Utility Skid
Spot Catwalk and Pipe Racks
Spot Boiler
Inspect Loads – Simulation
Use Hand Signals to Direct a Vehicle ‐ Simulation
Use Hand Signals to Offload Equipment ‐ Simulation
Transportation
Site Requirements
Spotting

RIGGING IN

Rigging In Overview
Install Ground and Bonding Cables
Rig In Pump
Rig In Boiler
Rig In Crew Change Unit
Rig In Tankage Unit
Rig In Utility Skid
Rig In Carrier
Rig In Catwalk, Pipe Racks, and V-Door
Rig In Derrick
Rig In Derrick – Simulation

BASIC EQUIPMENT OPERATIONS

Basic Equipment Operations Overview
Rig Tank Operations
Rig Pump Operations
Remove / Install Wellhead
Rig In Accumulator
Test / Install BOP
Rig In Working Floor
Install Air Slips
Install Tubing Tongs
Install Rod Tongs
Crown Saver Operations
Raise/Lower Blocks – Simulation
Use Slips– Simulation
Test Crown Saver– Simulation
Basic Equipment Operations

ROD WORK

Rod Work Overview
Inspect / Install Rod‐Hoisting Equipment
Lock Out / Tag Out Lease
Lock Out / Tag Out Pump Jack
Remove / Install Horse Head
Pull / Lay Down Polished Rod
Install Rod Table
Pull / Lay Down Rods to Ground or Trailer
Pick Up Rods from Ground or Trailer
Trip Rods to Derrick
Trip Rods from Derrick
Use Rod Elevators to Trip Rods Out ‐ Simulation
Use Rod Elevators to Trip Rods In ‐ Simulation
Use Rod Tongs to Make Up Connections ‐ Simulation
Use Rod Tongs to Break Out Connections ‐ Simulation
Trip Rods to Derrick Using Tongs ‐ Simulation

TUBING WORK

Tubing Work Overview
Inspect Tubing‐Handling Equipment
Install Tubing‐Hoisting Equipment
Install Stabbing Valve for Night
Install Stabbing Valve During Kick
Pull and Lay Down Tubing to Pipe Racks / Ground / Trailer
Stand Tubing in Derrick
Pick Up and Run In Tubing from Pipe Racks / Ground / Trailer
Run In Tubing from Derrick
Slip and Cut Drill Line
Use Tubing Elevators – Simulation
Use Tubing Tongs to Make Up Connections – Simulation
Use Tubing Tongs to Break Out Connections – Simulation
Rack Tubing – Simulation
Secure the Well – Simulation
Run Tubing Into Well from Derrick – Simulation

SWABBING

Swabbing Overview
Prepare and Install Swabbing Equipment
Install Sand Line Flags
Inhibit Sand Line
Cut Sand Line
Pour a Rope Socket
Swab Well

COMPUTER REQUIREMENTS

Windows® XP, Vista, Win 7 or Win 8.
NOTE: Does not work on Mac OS
Minimum 2 GHz Processor, 256 MB RAM, and 3D Accelerated Video Card 128 MB.
High‐speed internet connection
Note that SRT does not work on Macs

TLNT reserves the right to cancel or change the date or location of its events. TLNT's responsibility will, under no circumstances, exceed the amount of the fee collected. TLNT is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at : inhouse@tlnt-training.com or click here to submit an online request.